Scott's Bowden Wade
Description
I Couldn'T Seem To Find That Right Setup For My Ideal Bowden Wade Setup So I Came Up With This. It'S A Mash Up From 3 Other Noted Things Found Here. It Uses The Hardware Used For Greg'S Hinged Accessible Extruder. The Housing Accepts Pc4-M10 Male Straight Pneumatics. Ideally You'Ll Want To Push The Tube Through So That It Almost Touches The Hobbed Bolt On Each Side. Update: Redesigned The Wade Body And Idler To Make Better Contact With Hobbed Bolt And Filament. Video: Https://Www.Facebook.Com/15487998541544I/Videos/10212176440019265/ Bom: Hobbed Bolt 3 608 Bearings 4 Washers 2 Nuts 2 Springs Grub Screw 2 50Mm Bolts 1 35Mm Bolt 3 M3 Nuts 2 M3 Washers 3 M3X10Mm Bolts Dowel Rod Can Be Purchased Here Or To Get A Better Idea Of What'S Needed: Http://Www.Makerfarm.Com/Index.Php/Extruders/Greg-S-Hinged-Accessible-Extruder-Hardware-Only-No-Printed-Parts.Html Enjoy! <A Href="Https://Www.Buymeacoffee.Com/Jenovacell" Target="_Blank"><Img Src="Https://Cdn.Buymeacoffee.Com/Buttons/Default-Blue.Png" Alt="Buy Me A Coffee" Style="Height: 51Px !Important;Width: 217Px !Important;" ></A>
Statistics
Likes
10
Downloads
0