Paper cup holder thingy!
Description
<Strong>This Item Was Printed In:</Strong> Real-Filament'S Light Blue Pla Ø2.85. <Strong>Print Time:</Strong> <H3>Print Settings</H3> <Strong>Quality</Strong> Layer Height: 0.25Mm <Strong>Shell</Strong> Wall Thickness: 1.05Mm Top/Bottom Thickness: 0.8Mm <Strong>Infill</Strong> Infill Density: 30% Infill Pattern: Grid. Infill Overlap Percentage: 20% Skin Overlap Percentage: 20% <Strong>Speed</Strong> Print Speed: 60Mm/S. Travel Speed: 120 Mm/S. <Strong>Support</Strong> Enable Support: No <Strong> Build Plate Adhesion</Strong> Build Plate Adhesion Type: None.
Statistics
Likes
35
Downloads
0