Coffee Traveler Lid
Description
Caution: 3D Printed Parts Are Inherently Not Food Safe. Please Understand The Risks Before Using This Design With Anything Intended For Human Consumption. I Looked High And Low For A Replacement Lid To My Traveler Mugs. After I Couldn'T Find One, I Decided To Design And Print A Replacement Using My Remaining Lid As A Template. The Design Is Two Parts, And It Snaps Together. An O-Ring Should Be Fitted Around The Bottom Part To Seal The Coffee Inside The Tumbler Mug. I Measured 71Mm Inner Diameter And 81Mm Outer Diameter, But I Have Not Yet Ordered O-Rings To Test With. It Is Compatible With The Seal From The Original Lid, However.
Statistics
Likes
5
Downloads
0