Orange Pi Zero Ultra Compact Case
Description
I Designed From Scratch This Case Because I Wanted A Case O Most Compact Possible (To Save Filament When Printing And To Carry Easily). After 3 Iterations, And A Lot Of Measures With A Digital Caliper I Design The Smallest Case On The Thingiverse. ### Main Features - Very Compact (Its The Smallest Case Possible Only 49X52X34 Mm) - Well Vented From All The Sides - Antenna Position Interchangeable (But You Can Also Choose To Keep The Antenna Inside The Case) - Leds Windows - Squared Box That Can Be Used In Different Orientations - Reinforced Mount Poles (With Ribs When Possible) ### What Do You Need: - 2 Small M3 Screws (M3X5 - Button Head) - 4 M3 Bolts (Flat Head With At Least 8Mm, I Used This Excellent Black Bolts From Aliexpress M3X12) - M3 Tap (Highly Recommended To Open Threads) ### When You Should Choose Another Case - You Don'T Have A Properly Calibrated Printer That Cannot Print With Precision Small Holes And 1.2 Mm Walls (***This Is A Complicated Object To Be Printed***) - You Don'T Like Tight Fits. The Placement Of The Objects Is Critical, And You Have A Little Margin To Play - You Need A Small Fan Or A Big Heatsink (I Used A Small Aluminum Heatsink And Because I Will Not Perform Very Cpu Intensive Tasks I Don'T Need To Worry A Lot About Cooling) - You Need A Stronger/Robust Case (I Used 1,2 Mm Walls So It'S Not The Toughest Cases) - You Don'T Have The Orange Pi Extension Board - You Need To Use The Gpios Pins Or The Serial Monitor Pins - You Need A Big Ir Window For The Side Sensor <Iframe Width="560" Height="315" Src="Https://Www.Youtube.Com/Embed/43Wrw8M3Lss" Frameborder="0" Allowfullscreen></Iframe>
Statistics
Likes
67
Downloads
0