AFM Tip Adjusted
Description
Update 10/28: I Also Had Trouble Getting The Tip To Slide Smoothly Over The Surface, So I Rounded Out The End. Less Accurate But More Clear During Demonstration. This Is Tipv3 I Printed The Afm Model At 175% It'S Normal Size Cura For Ultimaker And Lulzbot Both Had Trouble Processing The Original Tip File, Either Placing A Gap Between Tip And Shaft Or Only Importing Part. So I Just Heightened The Shaft Slightly To Insure Overlap And Re-Exported As An Stl. Sliced Fine And Printed Great
Statistics
Likes
2
Downloads
0