Dremel holder for AXA quick-change tool post
Description
This Is A Holder For A Dremel Moto-Tool Model 395 Mod 4. The Holder Is Designed To Hold The Dremel Without The Stamped Sheet Metal Nose Piece. The Screw Holes Are For 1/4" Or 6Mm Screws. This Is Designed To Sit Directly On The Top Of The Lathe'S Compound Slide And To Hold The Tool Centerline At The Lathe Spindle Centerline. A Hole Is Set Up For A Height-Adjustment Screw If Desired. The Quick-Change Tool Post Is A Wedge Style Of Axa Size. I Printed This From Pla With A 0.2Mm Height, 10 Layers Of Shell And A 100% Fill In A Honeycomb Pattern. 45 C Degrees Build Platform Temperature, 210 C Degrees Extruder Temperature. It Is Very Stiff For This Application. It Is Not Suitable For Grinding Precise Workpieces Because The Bearings In The Dremel Are Quite Poor. I'D Use A Toolpost Grinder If I Needed More Precision.
Statistics
Likes
46
Downloads
0