Mokujin Sparrow (lean test)

Description

This Is Less Of A Proper, Practical Calibration Model And More Of An Informal Test Documenting Some Printing Oddities, Namely That A Thinner Shell Is Less Prone To Stringing Than A Thicker One. Still, Maybe Someone Can Find The Model Useful Or At Least Give Their **Mokujin** A Little Friend. These Are Four Models Printed On Two Printers, Both Using Heated Build Plates, No Supports, And Roughly The Same Printing Speeds. The **Prusa** Clone Is Using **Polymaker Polymax**. The **Lulzbot Taz 5** Is Using **Colorfabb Xt** (Petg).

Statistics

Category

Tags