Jellyfish Lantern with Cardboard Tubes
Description
Resembling Bio-Luminescent Jellyfish, This Lantern Hangs From The Ceiling. It Was Made With Cardboard Shipping Tubes And 3D Printed Diffusers. The Diffusers Mix The Colors Of The [Red, Green And Blue Leds](Https://Www.Banggood.Com/5M-6072W-Dc12V-Led-Strip-Light-3528-300-Leds-Whitewarm-Whiteredblue-With-Dc-Female-Connector-P-1034235.Html). Three Diffuser Styles Are Available: With Seven Spikes, Five Spikes, Or No Spikes. Pilot Holes Are Drilled Into The Cardboard, And The Diffusers Are Attached With Small Wood Screws. The Sticky Backing Of The Flexible Led Strips Was Used To Attach Them To The Outer Circumferences Of The Tubes. The Center Of The 3" Tube (Smallest One) Is Large Enough To House A [Small 12 Volt Power Supply](Https://Www.Banggood.Com/Ac100-240V-To-Dc12V-1_25A-15W-Mini-Led-Switching-Power-Supply-Lighting-Transformer-Adapter-Driver-P-1061905.Html). The Ring Spacers Were Sized Close Enough To The Cardboard Tube Diameter That No Adhesive Was Necessary To Assemble The Tubes. Make Tube Ring Spacers To Match Your Cardboard Tubes By Editing [This Model On Tinkercad](Https://Www.Tinkercad.Com/Things/Lcjtotspjdc).
Statistics
Likes
19
Downloads
0