Replicator carbon bed corners
Description
It Is A Bed Corner Set To Fix The Reprap Carbon Print Plate (See Https://Shop.Germanreprap.Com/En/Product?Info=303). This Carbon Plate Is Delivered With 4 Metal Clips, Unusable On The Replicator Dual (Clone) Because The Clips Are Too Big And Can (Will !!!) Collide With The Hot-End. This Corner Set Is Based On The Creation By "Crux" (Http://Www.Thingiverse.Com/Thing:278540), But Modified Especially For The 0.8 Mm Height Of The Carbon Plate. The Corners Can Be Adjusted To Fix Sideways The Carbon Plate, So The Plate Can Be Still Removed And Replaced After Printing. Further Fixing Of The Plate Is Not Necessary, Maybe One Standard Clip As Additional Fix On The Right Bottom (Nearly Never Crossed By The Hot End). Update: Carbon_Corners_2 Added With Additional Overhanging Claw For Better Fixing Of The Carbon Plate. The Additional Size Is 1 Mm Height And 0.6 Mm Overhang. I'M Using A Mix - With Claw On The Front (No Impact To The Nozzle) And Without On The Back For Easier Plate Removing. This Thing Was Made With Tinkercad. Edit It Online Https://Tinkercad.Com/Things/Iiharl0Ntxy
Statistics
Likes
15
Downloads
0