MeanWell RS-50-5 and Arduino Uno Project Case
Description
I Needed A Cover For My [Meanwell Rs-50-5](Https://Www.Amazon.Com/Gp/Product/B005T6Tlmi) Power Supply And Decided To Make Mounts For All The Other Parts Of My Robotics Project. In Addition To The Power Supply, This Will Accommodate An Arduino Uno And Two [Joysticks](Https://Www.Amazon.Com/Gp/Product/B01N59Mk0U). Holes On The Back Fit An [Iec320 C14 Plug Socket](Https://Www.Amazon.Com/Gp/Product/B01N2T2N1W) (Same As Computers, Monitors, Etc.) And A [Snap In Rocker Switch](Https://Www.Amazon.Com/Gp/Product/B00Vu381Fw) Requiring A 21Mm Hole. There Is Some Extra Height Above The Plug Inlet And The Power Switch To Mount The Guts From A 9V Wall Wart (Mine Had An Led So I Drilled A Whole In The Case To Let It Pop Through). This Is To Power The Arduino Separately, And There Is A Hole Next To The Arduino Mount To Run A Dc Plug Through. For My Use, Dc Power Exits The Meanwell Power Supply And Goes To A Power Bus, Which I Mounted To One Of The Sides. This Thing Was Made With Tinkercad. Edit It Online Https://Www.Tinkercad.Com/Things/Iamgomfo3Du
Statistics
Likes
12
Downloads
0