Aurora Z605 Spool Holder
Description
I Saw A Few Spool Holders On Here For The Prusa I3 That Mounted To The Top Bar Of The Printer But Since My Printer Has A 50Mm Tall Top Bar And The Prusa Has A 40 Mm Top Bar I Designed My Own. It'S Not Pretty Because I'M Not Very Good At Designing Parts But It Works. I Made The Cups For The Tube Half-Circles With A Radius Of 9.5 Mm To Fit Emt Conduit Which I Had Lying Around But I Decided Once I Had The Arms Made To Design A Tube To Fit Instead Of Hacksawing Some Length Of Emt Because I Was Feeling Lazy. The Tube Is 18Mm In Diameter. The Stl Files Have Already Been Run Through Netfabb, And The Sldprt Files From Solidworks 2014 Are Included. I Only Designed The Arm Once, I Just Used Netfabb To Mirror It For The Second Arm. So Far This Is Working Much Better Than The Pegboard-Arm-With-Visegrips Arrangement I Had Before! If You Are Worried About The Tube Coming Out Of The Cups On The Arms Then You Could Put A Zip Tie Around It But I Don'T Think It Will Be An Issue. I'Ve Run It Without Them For A Few Hours And It Seems To Hold The Tube In Just From The Weight Of The Spool.
Statistics
Likes
2
Downloads
0