Online Particulate Matter Sensor (no temp and Humid)

Description

All Credits To Chris For This Great Project: Https://Www.Thingiverse.Com/Thechrisp I Just Made A Small Modification So That The Display Reads All 3 Particle Sizes And Thus Removed The Temp Sensor Hole From The Model. For The Original Instructions Please Read Chrisp'S Thing:Https://Www.Thingiverse.Com/Thing:2320020 I Do Have Some Noob Tips To Share My Experience As A Total Arduino Noob. Perhaps It Helps Other Builders. Perhaps All Is Obvious For Experienced People...I Was Not :-) Download And Install Arduino Ide (Https://Www.Arduino.Cc/En/Main/Software) First Of All The Programming; You Need To Add The Esp8266 Arduino Extension To Ide: Start Arduino And Open Preferences Window. Enter Arduino.Esp8266.Com/Stable/Package_Esp8266Com_Index.Json Into Additional Board Manager Urls Field. You Can Add Multiple Urls, Separating Them With Commas. Open Boards Manager From Tools > Board Menu And Install Esp8266 Platform Select Your Esp8266 Board From Tools > Board Menu After Installation. Load The Sketch File Into Ide. If You Now Press The Compile Button You Get A Bunch Of Errors Because Ide Is Missing Some Librarys. You Need To Add All Missing Libs Via Sketch->Inc. Library->Manage Library: There Search For The Reported Missing Lib Until All Lib'S Are Installed And There Is No Longer A Missing Library. Now Your You Should Be Able To Send The Code To The Esp2866 Regarding The Components, I Made The Mistake That I Reversed The Pms5003 Color Code (Red And Black Was Not The Power) Pin 1 Is Actually On The Right. In My Case The Coloring Of The Schematic On Github Was Correct, For Me Just Reversed. Eventually I Changed The Sketch So That There Are No Temp And Humid Reading, But Mine Display'S All 3 Particle Values.

Statistics

Category

Tags