Syringe Pump FPLC Biomaker
Description
This Is The Syringe Pump Design For Our Biomaker Fplc Design. Key Features: Upright Format, With The Arduino Enclosed In The Base. The Luer Loc Connector Is Part Of A Removable Adapter, To Allow Tweaking The Seal Between The Base & The Syringe. A Threaded Brass Knurl Insert Nut Bonded To The Removeable Adapter Helps To Connect Tubing (Peek, 1.75Mm Od) Using A Printed Screw - Needs Improvements. The Tubing Exits The Pump At The Side. Buttons And A Status Led Allow Controlling The Pump Manually, And Through The Master Control Unit Via I2C.
Statistics
Likes
13
Downloads
0