VSR10 Silencer Adapter(s)

Description

Please Note That This Is For A Few Centemeters From The Back To The Front Of The Vsr10 Only. If You Would Like To Extend It Beyond That Point, I Have Added And Additional Plug That Fits Into The Pipe. This Can Then Be Used As A Spacer At The Tip Of The Vsr Barrel And At The Tip End Of The Silencer... I Did Not Add Grubscrew Holes As The Spacers Fit Nice And Tight Onto The Barrel Itself My Design Is For Adapters To Fit A 45Mm Pvc Pipe Over The Existing Barrel. So The Design Is Two Attachments That Fit Inside The Pvc Pipe And Over The Barrel Of The Vsr/Bar10. Thus The Length Of The Silencer Is Up To The Customizer Of The Airsoft Rifle. The Friction Between The Barrel And The Spacer Is Adequate To Keep The Adapter On The Vsr10 Update: There Are 40Mm Spacers (The Size Is In The Name) And 45Mm Spacers (The Files With No Size Description)

Statistics

Category

Tags