Sienci Mill One V2- Prototype Clamping System
Description
A Powerful Cnc Needs A Powerful Clamping Solution. This New Prototype Clamping System For The Sienci Mill One Was Made In-House With Pvc, Hdpe, And Aluminum. These Prototype Machinist Clamps Will Allow You To Securely Mount Material To Your Mill One With A Very Low Profile, Make Your Own And Let Us Know What You Think! There Is A Provided G-Code File For Modifying Your Y Gantry To Create Mounting Points. Watch The Video To Get A Better Understanding Of This Process: Https://Www.Youtube.Com/Watch?V=_Wnaaiy-Grc Some Tips When Using These Clamps: -> Plan You Clamp Placement Beforehand! This Will Ensure That The Router Will Not Run Into The Clamps During A Milling Operation. -> Securing Material On One Side Can Sometimes Cause The Material To Lift Up On One Side. Double Check That The Bottom Of The Material Is Flat Before Milling. -> Use A Combination Of Clamps And Double Sided Carpet Tape To Create An Even More Secure Workholding Combination! -> Use The Flat Notches On The Top Of The Clamps For Both Holding Your Material Down And Locking It From Moving Side-To-Side. -> Try To Only Use The Clamping Hole Pattern We'Ve Provided, Any Changes Made To The File We Provide May Weaken Your Mill One'S Milling Platform.
Statistics
Likes
33
Downloads
0