Anti Back-lash lead screw nut mount
Description
This Is An Anti Back-Lash Nut Mount For 2020 Aluminium Rail Or Wherever. It Requires Two Lead Screw Nuts And One Spring. In Addition To That You Will Also Need 2 X 25Mm M5 Low Profile Screws 4X 10Mm M3 Cap Head Screws 4X 30Mm M3 Cap Head Screws 4X M3 Nylon Insert Hex Lock Nuts 1X 30Mm Push Spring 9,5Mm Inner Diam. 11,5Mm Outer Diam. I Have Printed These Mounts And Use Them On One Of My Printer Designs. The Result Is A Tight Nut, With No Womble Or Play At All. By Far The Best-Tightest-Most Efficient Lead Screw Nut Mount For Its Money :) Printer Setup; 0.2 Mm Layer Height Or Lower 0,4 Mm Wall Thickness (Or One Layer Depending On Your Nozzle) 80% Infill Or More 20-50Mm/Sec Max. Speed Enjoy!
Statistics
Likes
25
Downloads
0