Snapfit LED holder for Creality CR-10
Description
__The Cr-10 Was Designed To Print Well. But That Gets Boring After A Short While, So I Recommend You Step Your Game Up: 3D Printing *In The Dark*__ Intended For Use On The Top Bar, But It Does Work On The Vertical Ones (Unless You Actually Turn The Printer On And Use It). It Has A Convenient Hole And Holder For The Wires. I *Do Not Recommend* Using High-Powered Leds As This Model Does Not Feature Any Cooling Whatsoever. Made To Fit A Common Chinese Led Panel (40Mm X 35Mm) Snap Fit Inner Width Is 6Mm And 9Mm Outer (Modeled For Stock Cr-10 Profiles) The Print Quality On My Pictures Is Quite Poor, That Is Mostly Due To Poorly Set Printing Settings And Has Little To Do With The Model. **Dimensions** (Everything In Millimeter) *Whole Model:* 50 X 40 X 32 *Model Without Snapfit:* 50 X 45 X 7 *Max Led Size:* 40 X 35 X 5 (Taller Will Fit But Will Stick Out Of The Model) Made Using Solidworks 2016
Statistics
Likes
31
Downloads
0