Udoo X86 3D printed case
Description
This Is A Case I Designed For The Udoo X86. It'S Made To Allow Space For 1 Sata Hard Drive, Position The Antennas Either On The Top Or Side, And Give Access To The Side Ports + Gpio Pins. It'S A Very Functional Case, Albeit Not The Slimmest, But It Will Protect The Pc. There Are Mount Points On The Bottom To Allow Wood Screws To Wall Mount The Udoo. The Orientation Of The Stl Files Are Not Correct, Edit For Best Printing. To Assemble The Case You Will Need: 4 X M3 20Mm F-F Standoffs: Https://Www.Amazon.Com/Uxcell-Female-Threaded-Standoff-Pillar/Dp/B015A3Lixe/Ref=Sr_Ph_1?Ie=Utf8&Qid=1509749214&Sr=Sr-1&Keywords=M3+20Mm 4 X M3 40Mm M-F Standoffs: Https://Www.Amazon.Com/Uxcell-Female-Thread-Stand-Off-Spacers/Dp/B00Ao432J8/Ref=Sr_1_7?Ie=Utf8&Qid=1509749231&Sr=8-7&Keywords=M3+40Mm+Standoff 8 X M3 12Mm Screws: Https://Www.Amazon.Com/Uxcell-M3X12Mm-Carbon-Countersunk-Socket/Dp/B01E6Eic2S/Ref=Sr_1_5?Ie=Utf8&Qid=1509749307&Sr=8-5&Keywords=M3+12Mm+Countersunk The Sata Hard Drive Should Be Able To Press-Fit Into The Slot Its Designated For. For The Udoo Antennas, Use Only The Gold Hex Nut On The Exterior Of The 3D Printed Case (The Lock Nut Washer Takes Too Much Thickness). I Also Had To Hot Glue The Wifi Leads To The Pcb To Prevent Them From Detaching While Assembling The Antennas. I Provided The Original Solidworks Files. Feel Free To Edit.
Statistics
Likes
6
Downloads
0