Wanhao i3 Plus Z axis stabilizer (Cocoon Create Touch)

Description

07/04/18: Uploaded Adjusted Version With 0.2Mm Tolerance (Originally 0.1Mm) Z Screw Stabilizer For Wanhao I3 Plus To Install, 1. Undo The Plastic Clips In The Gantry Which Holds The Ribbon Cable 2. Undo And Remove All Screws Securing The Top Part Of The Gantry 3. Lift Up The Gantry 4. Slide The Stabilizers On, Flip One Of Them Upside Down For The Right Z Screw 5. Gently Pull The Screw And Rod Away From The Gantry, Match The 2 Circle Nubs On The Gantry To The Notches On The Stabilizers 6. Reinstall The Gantry 7. (Optional) Use 4X Longer M3 Screws (10 Or 15Mm) To Thread Into The Stabilizers

Statistics

Category

Tags