3dTouch Sensor Mount Geeetech I3 Pro C(B) mounting

Description

Update: See .Pdf For More Information. Thingiverse Was Not Saving My Update Correctly. If You Use This, Please Share A Picture Of It. Thanks. Ok, Here Is The Long Awaited 3Dtouch Update To My Auto-Level Post. Not Really A Re-Mix. So Many Projects Kept Me From Finishing This Before Now. Including Upgrading My Printer With A Metal Bed (Leveling Problems). But This New Upgrade Works Well. Please Refer Back To My Original Post ‘Geeetech I3 Pro C Inductive Sensor Mount By Jd_Printing, Published Sep 3, 2016’ For Marlin Printer Setting. Take Note Of Probing Points! And How To Calculate Them. I Will Only Talk About The Changes And How To Calibrate The Probe Here. I Followed The 3Dtouch Auto Leveling Senor User Manual For Modifying My Gt2560 Board. Good Instructions For The Most Part And I Had No Problem Hooking Up The Sensor. Just A Note; Go By Wire Color Not The Position In The Sensor Plug! I Was Not Sure Of The Height Needed For The Probe So I Made This One Adjustable. It Does Require A Little Bit Of Filing And/Or Sanding To Get A Smooth Movement. But A Little Stiffness Is Good When Adjusting.

Statistics

Category

Tags