Domed Nut Cap M6 6mm
Description
The Las Vegas Sun Crumbled The 40 Domed Nut Caps That Came With Our Patio Furniture Set. My Wife Suggested As One Of My First Projects I Design And Print Replacement Nut Caps. After Printing One And Verifying The Fit I Loaded Up My Build Plate In Cura And Let'Er Rip. I Found That The Cap Fit Varies From Nut To Nut. I Could Push A Few Of The Caps On With My Fingers But I Needed To Tap Most On With A Rubber Mallet Which Gave A Nice Tight Fit. Although I Have Not Tried It, With The Right Scaling This Nut Cap Would Likely Work For Sae English Sizes, Too. Fyi: As Designed, The Inside Measurement From Face To Face Of This 6Mm Nut Cap Is 15.24Mm. You Can Use This Measurement To Save You A Step When Scaling For Other Nut Sizes. Divide Your Nut'S Facing Flat Sides Measurement By 15.24 And Multiply By 100 = Your Scaling Value Percentage. **Example:** 18Mm / 15.24Mm X 100 = 118.11% After Doing A Test Print Tweak The Scaling Factor To Further Adjust For Fit. The Hot Pink Nut Cap (What The Chinese Pla Manufacturers Say Is Purple) Is Installed On My Anet A8. **-Vegasguy**
Statistics
Likes
132
Downloads
0