Tevo Tarantula simple modular X carriage with layer fan
Description
Https://Youtu.Be/Ul2P0K8Ls94 -Inspired By Other Magnetic Modular X Carriages, I Present You This Modular X-Carriage For Tevo Tarantula 40X20Mm Rail. -Simpler Build And Design, Less Material To Print, Less Mass And Vibrations, Less Room For Errors. -Extruder Is Mounted To Plate Via 6Mm Magnets. -Magnets To Be Mounted And Hot Glued If Needed -51Mm Radial Fan Is Mounted To The Back Via Foam Tape To Eliminate Noise And Vibration. -Radial Fan'S Position Also Balances With The Extruder. -An External X Axis Limit Switch Plate Is Added To The Left Z Axis Carriage To Activate The Limit Switch; The Limit Switch Is Mounted At The Back Of The Front Plate. (Refer To Images) -Belt To Be Mounted On The Top 2 Screws (Left And Right) Disclaimer: I Obtained Dimensions From E3D Official Documentation/ Drawings And A Little Bit Of Googling For Bl Touch, Therefore Dimensions May Be Inaccurate. I Do Not Earn Tips And Money For Designing These Parts And I Did Waste My Very Own Filaments During The Prototyping Process. Feel Free To Leave A Note If The Parts Didn'T Work Out, Or Better Yet Offer Me The Real Dimensions! Printed Parts (In Red): 1. Front Plate 2. Back Plate 3. Extruder Mount 4. Fan Duct 5. Limit Switch Plate 6. Laser Mount 7. E3D Mount 8. E3D Mount Flange 9. Bl Touch Mount * Mirror It To Mount It On The Left Side Additional Parts (In Purple): 1. 6Mm Magnets 2. Radial Fan Reused Parts From Printer (In Green): 1. Screws 2. Left Z Axis Plate 3. Extruder 4. 40X20Mm Rail 5. Wheels License: Creative Commons - Attribution - Non-Commercial - Share Alike **Update 20180221** Updated X-Carriage Front Plate.Stl Uploaded Bl Touch Mount V1.Stl Uploaded E3D Mount V1.Stl Uploaded E3D Mount Flange V1.Stl Uploaded Laser Mount V3.Stl **Update 20180105** Final Design, Working Prototype. Updated X-Carriage Front Plate.Stl Updated X-Carriage Back Plate.Stl Updated X-Carriage Extruder Mount.Stl **Update 20171127** Updated X-Carriage Front Plate.Stl Updated X-Carriage Back Plate V2.Stl - Updated Dimensions On Belt-Screw Flange For Better Clearance From The Rail. **Update 20171125** Uploaded Laser Mount V3.Stl (For 2.5W Laser Engraver From Ebay) **Update 20171112** New Designs, No Additional Washers Needed. Uploaded Assembly Manual 3 (Including Plans) Updated X-Carriage Front Plate.Stl Updated X-Carriage Back Plate V2.Stl Updated X-Carriage Extruder Mount V2.Stl Updated Fan Duct V2.Stl Updated Images **Update 20171105** Updated Extruder Mount Dimension Updated Fan Duct Dimension
Statistics
Likes
51
Downloads
0