Anet A8 Direct Feed E3D Carriage Mount
Description
This Product & Many More Can Be Brought Via Our Website At Www.Cobratronic.Com **Anet Direct Feed E3D Carriage Mount** Motor Mounted 90 Degrees Offset On X Axis Which Gives Easy Front Access To Filament Feeder Motor Weight Centrally Mounted Directly Above Bearings Heatsink Fan Mounted Behind Cooling Fins To Give Improved Vision Side Mounted Hotend Fan To Give Improved Hotend Vision Additional Mounting Points For Bed Sensor Brackets Mounting Points For Black Semi Enclosed Drag Chain Carrier 10Mm X 10Mm. Tidy Cable Direction Management Before You Ask Yes Built In Pla. Print Petg And Abs With No Problem. If This Mount Gets That Hot Then You Need To Switch On Your Heat Sink Fan As The Mounting Area Should Always Be Cold Unless You Like Blocked Filament Feed Cold Areas Built For Use With Additional Parts E3D Clone Hotend Https://Www.Amazon.Co.Uk/Finlon-Hotend-Extruder-Printer-Filament/Dp/B0734Mr3Jr/Ref=Sr_1_1?Rps=1&Ie=Utf8&Qid=1508671763&Sr=8-1&Keywords=E3D+V6&Refinements=P_76%3A419158031 3D Printer Mk8 Remote Extruder Right Hand Https://Www.Amazon.Co.Uk/Extruder-Accessories-Filament-Aluminum-Accessory/Dp/B073Yb25Yv/Ref=Sr_1_8?S=Industrial&Ie=Utf8&Qid=1508671519&Sr=1-8&Keywords=3D+Printer+Mk8+Remote+Extruder Heat Sink Cooling Fan Https://Www.Amazon.Co.Uk/Gp/Product/B018Gfh6Xo/Ref=Oh_Aui_Detailpage_O00_S00?Ie=Utf8&Psc=1 Black Semi Enclosed Drag Chain Carrier 10Mm X 10Mm Https://Www.Amazon.Co.Uk/Gp/Product/B008Ibksdw/Ref=Oh_Aui_Detailpage_O01_S00?Ie=Utf8&Psc=1 Printer: Anet A8 Material: Pla Extruder Temp: 195 Bed Temp: 60 Resolution: 0.2 Infill: 40% Cooling: Yes, Start At Layer 4 Rafts: No Supports: Yes Support Type: Build Platform Only Support Infill:30% Dense Infil: 60% Horizontal Offset: 0.25 Upper Vertical Separation Layers: 1 Lower Vertical Separation Layers: 1 **Anet E3D Carriage Clamp** Use Two M4 Socket Head Cap Screws Printer: Anet A8 Material: Pla Extruder Temp: 195 Bed Temp: 60 Resolution: 0.2 Infill: 50% Cooling: Yes, Start At Level 4 Rafts: No Supports: No **X Axis Cable Tray Mount** Made From Pla To Fit Black Semi Enclosed Drag Chain Carrier 10Mm X 10Mm. Mounts To X Axis Motor And Includes Z Axis End Stop Adjuster Mounting Holes For 10Mm X 10Mm Drag Chain Carrier Holes For Cable Tie Attachment Https://Www.Amazon.Co.Uk/Gp/Product/B008Ibksdw/Ref=Oh_Aui_Detailpage_O01_S00?Ie=Utf8&Psc=1 Printer: Anet A8 Material: Pla Extruder Temp: 195 Bed Temp: 60 Resolution: 0.2 Infill: 35% Cooling: Yes, Start At Level 4 Rafts: No Supports: Yes. Support Type: Normal Support Infill:30% Dense Infil: 60% Horizontal Offset:0.25 Upper Vertical Separation Layers:1 Lower Vertical Separation Layers:1 **Z End Stop Micro Switch Bracket ** Taken From : Https://Www.Thingiverse.Com/Thing:2050229/
Statistics
Likes
526
Downloads
0