Y Belt Clamp for Anet A8
Description
This Is A Y Belt Clamp For Anet A8/Am8. Works With Stock H Plate. Must Be Printed: - 2X Bottom Y Belt Clamp - 1X Top Y Belt Clamp. Both Pieces Have A Flat Side, While The Other Side Is Reccessed In Order To Fit The Belt. I'D Recommend To Use A Little Drop Of Ca Glue Between The Top Y Belt Clamp And The Aluminum H Plate, So It Will Make Easier To Clamp The Belt In The Right Place By Keeping The Top Part Fixed. I'D Also Recommend Using Tensioner For Y (And For X, Btw). You'Ll Need: - 4X M4X16Mm Bolts
Statistics
Likes
112
Downloads
0