e3d Titan aero X-carriage
Description
Couldn'T Find Any E3D Titan Aero Mounts That Would Fit My Tevo Tarantula, So I Made My Own. Printed Part Is : One Front Side , Where You Will Mount The Motor And Extruder One Backside , Between Front And Back Side You Will Have Two Wheels One Top , Where The The Third Wheel Will Be And One Left And Right Part Where Och Bolt Everything Together Matrial List : I Used 3 Wheels From The Original Tt X-Carriage 3 M5 Bolts And And Nut , 35Mm Long Bolt 2 M3 Nut Stanoff/Spacer Or What They Are Called Https://Www.Aliexpress.Com/Snapshot/0.Html?Spm=A2G0S.9042647.6.2.Dttpzh&Orderid=500874011254123&Productid=32597430631 2 M3 Nut In The Left And Right Part 2 M3X20Mm And Left And Right Side 2 M3X16Mm In The Front Side In To The Left And Right Part 2 M3X8Mm From The Back Side Into The Left And Right Part 2 M3X16Mm In The Left And Right Side Where You Should Attach The Belt This Is A Work In Progress , In This Writing Times I Haven'T Tested It Yet . And If You See Or Have Some Problems With It Pleas Tell Me So I Can Chanse It Happy Printing !! ---------------------- -------------------------------------------------------------------------------------------------------------------------- Update 17-11-09 ----------------------- New Front Side Part, Added A Hole For The Driver Gear To Spin , Something I Forget When I Design This Print -------------------------------------------------------------------------------------------------------------------------- Update 17-11-17 ------------------------ Added A New Back Part That You Can Mount A Layer Fan That Goes Under The Carriage (Tested And Dont Work That Good, New Version Will Come 17-12-09 )
Statistics
Likes
6
Downloads
0