Cooling Fan mount for East3D Gecko Stepper Drivers
Description
The Idea Is To Make Minimum Changes To The Machine But Still Takes The Overall Experience A Step Further.I Think The Majority Of The Noise Is Coming From The Fan Grill. Basically, I Just Repositioned The Original Cooling Fan, And 40Mm Is Quite Commonly Available If You Desire To Use A Quieter Fan. On Top Of Existing Screws And Nuts, You Still Need, M3 T Nuts - 2 M3X14Mm Screws - 2 M3X8Mm Screws - 2 M3 Washer (Optional) - 2 Rubber/Silicone Rings To Soft Mount The Fan (Optional) - 2 Also, You Might Want To Join Us At [East3D Gecko Facebook Group](Https://Www.Facebook.Com/Groups/East3Dgecko/).
Statistics
Likes
8
Downloads
0