Bed levelling nuts for Anet A8
Description
Update. I Just Realized The Nuts Were Zero Tolerance To My Frame. And The Bushings On Top Of M3 Nuts Add About 1/4" To The Height Of The Bed. One Visit To The Drawing Board And I Reduced The Diameter Of The Nuts And Added Tolerance To The Inside Of The Upper Bushing To Completely Absorb The M3 Nut. This Is A Remix To The Bed Level Upgrade By Malcy. I Found The Original Didn'T Fit The Butterfly Nuts That Came With My Anet – They Are Fatter Where The Nut Meets The Wings. The Mod Is A 2Mm Radius Easing On The Interior To Give It More Room. The Bushings For The Springs Are The Same. 50% Infill Might Not Be Necessary, But I Wanted To Be Sure. It Might Be Useful To Put A Washer Between The Plastic Nut And The Bottom Of The H-Frame. Per Malcy'S Note, You Ought To De-Tap The Hole In The H-Frame With A Drill Bit.
Statistics
Likes
14
Downloads
0