Prusa i3 improved X ends for brass TR8 / T8 nuts (anti-backlash nuts supported)

Description

With These Modified X-Ends (Compatible With The [Prusa I3 Improved Xz Axis](Https://Www.Thingiverse.Com/Thing:372056/) From [Jkoljo](Https://Www.Thingiverse.Com/Jkoljo)) You Can Use Your Favorite Tr8 (Sometimes Called T8) Acme Lead Screws + Nuts On Your Prusa I3 Or Reprap. :) I Have Made 4 Versions Of Both X-Ends. The Differences: - Designed For Normal Tr8 Nut / Designed For Anti-Backlash Tr8 Nut - **Different Ways Of Mounting The Nut:** - M3 Screws And Nuts - Screwing M3 Directly Into The Plastic - Screwing M4 Directly Into The Plastic Of Course It Is Possible To Use Any ~3Mm Wood Screw Instead Of M3, Or ~4Mm Instead Of M4. The Inner Diameter Of The Screw Holes On The M3 Designs Is 2.5Mm (With Exception Of The Version That Uses Screws + Nuts). The Inner Diameter Of The Screw Holes On The M4 Designs Is 3.5Mm. (There Is No M4 Version Which Uses Nuts Because Those Nuts Would Interfere With The Tr8 Nut Itself, Whether Anti-Backlash Or Not.) ##### \*\*Recommendation\*\* I Strongly Recommend You To Print A Sample Of The Top (~20 Layers Or So) And Check If The Nut Actually Fits With The Holes. I Have Found That Different Resellers And Manufacturers Can Sell Nuts Which Look The Same But Have Small Differences In The Distance Between The Screw Holes And The Size Of The Holes.

Statistics

Category

Tags