Prusa I3 MKS2 improved Extruder Cover
Description
Using The Silicone Sock I Noticed That The Small Lip At The Cover Got In Contact With The Hot Sock And After Some Time Got Weak And Distorted And Pulled The Eye For The Fan Duct With It Downwards. Not Much But So That My Sense For Symmetry Could Not Bear It. I Improved The Great (They Could Not Know I Would Use A Sock) Prusa-Cover Making A Little Space For The Heat-Block Covered In The Sock For Not To Touch The Cover. Adding A Small Vent-Hole To That Air-Pocket To Flush It Slightly. Strengthened The Bolt-Eye For The Duct. Pictures Are Of A Prototype Which I Had To Rework A Bit. With The .Stl You Certainly Get The Final Design Which Fits Perfectly With Https://Www.Thingiverse.Com/Thing:2578649 Attention! The Duct-Hole Cuts With The Hole For The Lower Fan-Screw. Use A Slightly Shorter One. Made With Petg From These Guys Https://Www.3Dpsp.De/ As All My Other Printer Parts. No Drooping Or Degrading At All.... This Stuff Turned Out To Be Quite Fine To Process. It Is Quite Sturdy, No Problems With Adhesion At All. And Really Nice And Brilliant Colours For A Reasonable Price.
Statistics
Likes
3
Downloads
0