Bugsy Jr, Micro Quadcopter, Baby 250
Description
Bugsy Jr. Was Made With One Real Purpose In Mind, To Look Adorable Next To A Typical 250 Quad. However, It Turns Out He Is A Proper Quad In His Own Right! Keep In Mind, This Is A Fragile Little Guy. The Main Plates Are Only 1Mm Thick, And Depending On The Material Used Can Crack Easy. On The Upside, It Is Quite Fast To Print More. Currently I Get ~5 Min Of Flight Time Going Easy On It. **Print Using A Rigid Filament, Particularly For The Arms, To Reduce Vibration/Noise Issues** *Print List:* + Main Plate (2) + Arm (4) + Top Plate (1) + Motorspacer(4) (Tpu) + Batterystrap(2) (Tpu) - Narrow Straps Fit Bottom Battery Mount Slots As Well As Top + Camera Mount(2) (Tpu) **Print The Mount Twice, One Time Mirrored ** *Parts List(As Pictured):* + 0703 10000Kv Motors (4) + Betaflight F3 Micro 6A 2S 4-In-1 Brushless Esc Osd Flight Controller Micro Cube + Xt30 Battery Cable + Makerfire 350Mah 60C 2S 7.4V Lipo + Props: 55Mm, 60Mm *Should* Fit, Haven'T Tried Yet *Hardware:* + M2 Nylon Assortment, Designed For 15Mm Standoffs Between Top And Main Plate *History:* + 12/06/17 - Fixed A Misplaced Mounting Hole In Top Plate + 12/02/17 - Further Updated Arms, Nubs On End To Protect Motors. Re-Oriented Arm Screw Holes To Help Prevent Them Getting Ripped Out In A Forward Collision. + 11/30/17 - Stronger Arms, Much Less Vibration. Modified Main Plate For Passing Wiring Between Plates. Replaced Original Top Plate With Notched Plate, Modified Holes For Aio Camera. + 11/26/17 - Updated Screw Hole Sizes On Everything To Reduce Slop In Arms And Body. Use A 2Mm Or 5/64 Bit To Clean Up Holes As Necessary. Added Narrow Battery Straps And Strap Holes To Main Frame For Bottom Mounted Battery. + 11/25/17 - Added The Camera Mount + 11/25/17 - Added A Top Plate With A Slight Front Notch For Fpv View + 11/25/17 - Added Feet! Top Plate Hole For Camera Buttons. + 11/24/17 - Initial Upload
Statistics
Likes
20
Downloads
0