CR-10S IKEA LOTS Clip Set
Description
This Is An Adaptation Of Hiruna'S Nicely-Designed Clips For Fitting 300X300Mm Ikea Lots Mirrors To The Aluminium Bed Of The Creality Cr-10 (Mines A Cr-10S Which May Account For Some Of The Adjustments Mentioned Below). Before Printing, Please See Hiruna'S Version For A Description Of The Printing Orientation. I'Ll Upload Some More Pictures When I Have Time. I Found The Originals Too Loose, So I Shrunk The Height By 0.5 Mm. Note That I Have My Mirror Slightly Offset Towards The Front-Left, Not Centred, And The Clips Have Been Adjusted Accordingly. Because The Clips Are Different, I Have Labelled Them Fl, Fr, Br, Bl For Front-Left, Etc) Also, I Found The Original Clip For The Cable Restraining Corner Extremely Difficult (Not Impossible) To Fit, So I Have Remixed That One To Have A Long 'Arm' Across The Back, That Is Much Easier To Fit. I Have Actually Provided Two Version Of That Clip; The Longer One Is Even Easier To Fit! You May Need To Lift Off The Restraining Unit'S Cap In Order To Fit The Clip To This Corner; It Just Pops Right Off If You Push To The Plastic Spring-Clips In (Light-Pressure Required; No Need To Force Anything), Then It Clips Back On. Thanks To Hiruna For The Original Design - Very Neat, And I Apologise For Butchering It In Tinkercad! Update (9Th Jan 2018): The 'Rearranged' Stl That I Uploaded, Mistakenly Only Contained One Of The Clips, So I Have Deleted It. I Have Now Uploaded The Five Clips In Separate Files (Labelled Fl For Front Left, Fr For Front Right, Etc) And Placed Them In Printing Orientation.
Statistics
Likes
51
Downloads
0