FlySky FS-i6 FPV Monitor Mount
Description
This Is A Remix Of Sirusdv'S Excellent Design. I Have Changed It To Allow It To Fit A Monitor Which Has 45Mm Long Vertical Slot At The Rear. I Also Moved The Mount 20Mm Further Forward. This Puts The Screen Nearer To You And Also Gives The Transmitter Antenna Better 'View' Of The Craft. You Need A 1/4-20 Unc A2 Countersunk Screw (3/8" - 1/2" Long) To Secure The Monitor To The Mount. I Also Added An Optional Neck Strap Balancer (Because The Original Mount Is Too Far Away When The Monitor Is Attached). For The Neck Strap Balancer, You Need 2 X 15Mm M3 Screws And Nuts. This Will Also Fit The Fs-I6X.
Statistics
Likes
28
Downloads
0