RepRap Discount Smart Controller LCD Case
Description
Edit - 12/21/2017, I Modified Banholm'S Y Tensioner And Added A Ball Mount For The Lcd. Now I Have A Centralized Location To Keep My Lcd "If I Want". I May Also Print A Few Bolt On Mounts To Mount Randomly Inside The Enclosure Just To Show Off, Lol. This Is My Lcd Case, Though This Version Has Some Minor Improvements To The One Pictured As This Case Is Part Of A Larger (Currently Incomplete) Project For My Octoprint And Other Boards. That Said, I'Ll Only Release The Stl Files And Not The Openscad Files. When My Stack Pack Project Is Complete, I Will Link These Things To That Project. Improvements I'Ve Made For This Release Are A Slightly Longer Shtf Button For Better Reach To The Emergency Shutoff Button, As Well As A Thru Hole To Screw In An M3 For More Precise Reach To The Same Button If The User Deems That Needed. I'Ve Made The Mounting Ball A Separate Piece That Can Be Bolted To Anything, Or Even Several Can Be Printed For Users To Have Multiple Mounting Locations. Mounting Hardware Is M4 Screws Of At Least 10Mm Long If Being Attached To Something That Is 5Mm Thick. If Thicker Surfaces Will Be Mounted To, User Must Select Appropriate Length Fasteners. Also Included Is My Stack Pack Lid For The Case That Will Go Under The Lcd. For The Ball I Suggest A Higher Infill, Maybe 60%+ To Keep Ball From Imploding Or Wearing Out Prematurely.
Statistics
Likes
13
Downloads
0