Z-Axis Guide (Prusa Clone)

Description

These Were Made For The Anet A8. ##### Notes * All Holes Have A 30 Degree Taper On The Plate Facing Side So As To Make For Easier Printing. This Does Not Appear To Affect The Strength And/Or Quality Of The Joint. ##### Planned Updates * A Plate To Cover The Entire Top So That No Holes Are Visible. * To Include A Design That Does Not Require External Parts To Be Purchased. * The Inclusion Of The Model Files So That Anyone Can Edit Them (Via Onshape). ##### Required Parts * 2 Bearings With An Inner Diameter Of 8Mm And An Outer Diameter Of 22Mm (I Bought Some From [Ebay](Https://Www.Ebay.Com/Itm/Pack-Of-10-Balls-Bearing-608Zz-Id-Bore-8Mm-22Mm-7Mm-608Z-By-Vxb-Bearings-608/400072122346?Sspagename=Strk%3Amebidx%3Ait&_Trksid=P2060353.M2749.L2649))

Statistics

Category

Tags