Slim Wallet V4.0 - Bigger / Stronger / Money Holder
Description
## Redesigned Wallet This Is A Work In Progress So If You Have Suggestions Then Please Leave It In The Comments So That I Can Improve This Wallet For Myself And Everyone Else! ### Issues With The Original * Case Cracking By The Lever * Hinge Was Cracking * Had To Enlarge The Hinge Holes To Allow 1.75 Mm Filament As A Hinge * Wall Thickness Was Not Optimised For A 0.3 Mm Nozzle So The Cards Would Not Fit And The Model Had To Be Scaled To 101% * Not Able To Hold Enough Cards * No Money Holder ### Resolved Issues ####Version 4.1 * Larger Hinge So That Will Not Break As Easily. * I Have Lowered The Quick Access Card Holder Which Provides More Wall Support And Prevents Cracking By The Lever. To Strengthen The Wall On The Other Side I Added A Money Pocket Which Of Course Is Useful In Itself. * Since 0.4 Mm Nozzles Are Most Popular And I Have A 0.3 Mm Nozzle, I Increased The Wall Thickness To 1.2 Mm Which Would Be Compatible With Both Nozzles. This Has A Benefit Of Being Stronger Which Was Requested By Numerous Comments On The Original Design. ####Version 4.2 * Reduced Overall Thickness Thereby Scaling Card Thickness To A Lower Tolerance * Slightly Reduced Lever Thickness And Added A 0.2 Mm Slot To Allow It To Slide In. _Expected 0.2 Mm Layer Height When Printing_ * Decreased The Tolerance Between The Lid And The Case Hinge * Reduced Filament Hinge Hole From 2.2 Mm To 2.0 Mm To Better Allow For 1.75 Mm Filament * Testing A Money Clip Extending From The Money Pocket! ####Version 4.3 * Better Money Clip! ####Wallet Remix V34 - 55 Mm Quick Card Slot.Stl * Reduced The Overall Width Of The Inside Cards By 0.1Mm To Allow The Lid To Stay Closed * Continued With The Money Slot Design Where The Lid Stops The Money From Falling Out ####Wallet Remix V36 - 54.3 Mm Quick Card Slot.Stl * Added A Version With A Smaller Quick Card Slot For Those Who Say That Their Card Falls Out
Statistics
Likes
174
Downloads
0