The Legend of Zelda - Hylian Shield (Breath of the Wild)

Description

**Update October 29, 2018:** _I Have Added The Fusion 360 Source Project (.F3D File) To The Files Section For Anyone Who Wants To Tweak The Design._ --- This Is A Model Of The *Hylian Shield* From *The Legend Of Zelda: Breath Of The Wild* Made Specifically For Multi-Extruder Printers. **Please Be Aware That The Colourized Version Of This Model Was Not Designed To Be Printed In Pieces On A Single-Extruder Machine And Assembled Afterwards.** Use *Hylian_Shield-Onepiece.Stl* To Get Everything At Once In A Single Colour. The Print In The Cover Photo Was Done On A Quad Extruder Prusa I3 Mk2 Mmu As Follows: - **Hylian_Shield-Body.Stl** *Silver Pla (Extruder 1)* - **Hylian_Shield-Plate.Stl** *Navy Pla (Extruder 2)* - **Hylian_Shield-Zigzags.Stl** *Silver Pla (Extruder 1)* - **Hylian_Shield-Triforce.Stl** *Gold Pla (Extruder 3)* - **Hylian_Shield-Triforce_Center.Stl** *Navy Pla (Extruder 2)* - **Hylian_Shield-Phoenix_Flat.Stl** *Red Pla (Extruder 4)* In Addition To The .Stl Files Used In My Print, I Have Included The Following: - **Hylian_Shield-Phoenix_Raised.Stl**: This Can Be Used In Place Of The *Flat.Stl* Version If You Prefer The Phoenix To Be Raised Off Of The Shield Plate Rather Than Level With It. - **Hylian_Shield-Onepiece.Stl**: This Can Be Used To Print Everything At Once In A Single Colour/Material. Note That This Uses The Raised Version Of The Phoenix, As It Would Otherwise Blend Right Into The Shield Plate. Note That I Only Needed **Hylian_Shield-Triforce_Center.Stl** Because Slic3R Refused To Play Nicely With The Central Triangle In *Plate.Stl*. If You Use A Different Slicer, You May Find That You Don'T Need *Triforce_Center.Stl* At All. When Printed At 100% Size, The Shield Measures Approximately 124Mm X 100Mm. Happy Printing!

Statistics

Category

Tags