3D-Printer control box
Description
A Small Box To Remotely Turn On/Off My Cr-10 Via Octoprint (And Printoid) Using A Solid State Relay. It Has Support For A 4X2 Pin Header On The Back Side (For Filament Runout Sensor Or Other I/O Purposes). The Step-Up-Converter Can Be Glued In Place On The Baseplate (Small Indentation). The Raspberry Pi Has To Be Powered Through Its Pin Header! Parts: * Raspberry Pi 3 Model B * Ssr - Https://Www.Amazon.Com/Gp/Product/B005K2Ixhu/Ref=Ox_Sc_Act_Title_1?Ie=Utf8&Smid=Agjob9Qikr6Cc * Noctua Nf-A6X25 (Or Any Other 60Mm X 60Mm X 25Xmm Fan) * Dc Step-Up-Converter - Https://Www.Amazon.Com/Sunkee-Lm2577-Adjustable-Step-Up-Converter/Dp/B008Hmetbe/Ref=Pd_Sim_23_3?_Encoding=Utf8&Psc=1&Refrid=Gnj6P151Hzycbgya707P * Threaded Brass Inserts (4Xm3 And 5Xm5) * Screws (4Xm3 And 5Xm5) * Power Plug Socket With Switch - Https://Www.Amazon.Com/Dp/B06Xkbrt9M/Ref=Sspa_Dk_Detail_1?Psc=1 * Power Plug Socket (Use A Female Power Plug Socket!! Or You Will Have Mains Voltage On The Open Output!!) * 5V Supply - Https://Www.Amazon.De/Gp/Product/B01I1Jewpu/Ref=Oh_Aui_Detailpage_O07_S00?Ie=Utf8&Psc=1 (This Is The One I Used And The Mount Is Designed For It !!!) * Irfz44N Mosfet Edit: * 01.01.2018: Added 3 New Covers (With/Without Cable Mount, With/Without Psu Mount). The Hole For The Cable Mount Is 13,5Mm. The Cable Clip Is Mounted With M3 Brass Inserts And Screws.
Statistics
Likes
24
Downloads
0