$50 Mirrorless/Mobile Motorized Slider
Description
V2 Is Out! I Just Finished Printing This And It Is Awesome! **Giveaway!** I'D Like To Send One Of These Off To One Youtube Subscriber. Comment Over On Youtube, And I'Ll Enter You In The Drawing. Once I Hit 50 Subscribers Or 50 Comments The Drawing Will End. I Will Pay Shipping Within The Us. Good Luck! Https://Youtu.Be/Hrviiyt1Eyo I Wanted A Relatively Cheap Slider That Kept Electronics Simple And Cheap. Total Parts Was $50 Or So Plus Shipping. I Am Getting About 7 Revolutions Per Second With This Setup. I'Ll Get Better Measurements And Video When This Is All Put Together. Motor: Https://Www.Amazon.Com/Gp/Product/B07558Gqn8/Ref=Oh_Aui_Detailpage_O07_S00?Ie=Utf8&Psc=1 Controller/Switch:Https://Www.Amazon.Com/Gp/Product/B01H1W79S0/Ref=Oh_Aui_Detailpage_O07_S00?Ie=Utf8&Psc=1 Gt2 20T Belt: $3China ( I Ordered One With Pulleys But Scraped Them And Modified/Printed A Correct Set To Mate To The 4Mm Motor Shaft.) 10Mm Carbon Tube - $7China I'Ve Included One Modified 4Mm Pulley I Remixed And One Gt2 Idler Pulley Found Here, Not My Design. Print: One Of Everything But The Feet. Feet X2. I Used 50% Infill And Abs With Great Results Thus Far... The Bearings Are Printed With No Infill, No Top/Bottom. Check Settings Here: Https://Www.Thingiverse.Com/Thing:2202854 Hardware: 6 X M4X12Mm Allen Head Bolts For The Feet And Motor Mounts. 4 X M4 Locking Nuts. 2 X M4 Regular Nuts (Not Nyloc) For The Motor Mounts. 1 X M3 Allen Head Bolt For The Idler Pulley. 1 X M3 Regular Nut For The Idler Pulley. 1 X M4 Or Whatever Imperial Size You Can Find, By 50Mm, For The Carriage And Suitable Locking Nut. 1/4 X 20 Hex Head For Thumbscrew Camera Attachment.
Statistics
Likes
48
Downloads
0