Marco's Wand
Description
A 3D Printed Replica Of The Shape That Star Butterfly'S Wand Takes When Is Held By Marco During The Third Season Of *Star Vs The Forces Of Evil*. **Instructions:** Download The Stl Files And Print Them With The Following Settings - Blade.Stl: 0.15Mm Layer Height, 15% Infill, No Supports - Jewel.Stl: 0.10Mm Layer Hieght, 10% Infill, No Supports - Facea.Stl: 0.30Mm Layer Height, 25% Infill, Supports Enabled - Faceb.Stl: 0.30Mm Layer Height, 25% Infill, Supports Enabled - Cover.Stl: 0.30Mm Layer Height, 25% Infill, Supports Enabled - Wing.Stl (2 Times): 0.30Mm Layer Height, 20% Infill, No Supports - Orba.Stl: 0.30Mm Layer Height, 25% Infill, Supports Enabled - Orbb.Stl: 0.30Mm Layer Height, 25% Infill, Supports Enabled - Orbpin.Stl (2 Times): 0.20Mm Layer Height, 50% Infill, No Supports - Uprcap.Stl: 0.30Mm Layer Height, 30% Infill, No Supports - Rod.Stl (2 Times): 0.30Mm Layer Height, 50% Infill, No Supports - Rodpin.Stl (2 Times): 0.20Mm Layer Height, 50% Infill, No Supports - Lwrcap.Stl: 0.30Mm Layer Height, 30% Infill, Supports Enabled - Tipa.Stl: 0.10Mm Layer Height, 25% Infill, No Supports - Tipb.Stl: 0.10Mm Layer Height, 25% Infill, No Supports After All The Pieces Have Been Printed, Assemble Them Following The Diagram. I Suggest To Use Superglue (Cyanoacrylate) To Hold Them Together. The Parts Can Be Painted Easily Using Acrylic Paint. I Made An Imgur Album Showing The Assembly Process! Https://Imgur.Com/Gallery/Oi3Hi
Statistics
Likes
61
Downloads
0