Graphtec CB09 Blade Holder Mount For Creality CR-10
Description
This Holder Is Designed To Mount Directly To The Stock Fan Housing Of The Creality Cr-10. This Is Designed To Hold The Graphtec Cb09 Blade Holder (I Found It Really Cheap On Ebay). The Assembly Is Adjustable In The Z-Axis. I Would Recommend Making An Adjustable Mount For The Limit Switch Of The Z-Axis; You Will Want To Elivade The Hotend Away From The Build Plate (Or Simply Tighten The Buildplate Down). The Parts Are Not Modeled Very Well, I Was In A Rush. I Printed Them Out Of Abs (I Was Out Of Everything Else) On My Creality Cr-10. It Works Great! I Used Inkscape With Martymcguire'S Inkscape-Unicorn Add-On Fromgithub To Write The G-Code. I Had A Lot Of Issues With Offset And Units In Inkscape; Once I Figured Out Offset And Scaling, I Made A .Svg Template. I Use Camotics To Test The G-Code Before. Some Modification To The G-Code Is Needed. The Inkscape-Unicorn Add-On Is Written Such That The G-Code Uses A Servo To Lift The A Pen. Just Change Code Where It Says (Pen Up) And (Pen Down) To Move Z Axis Up Or Down. I Will Be More Than Happy To Make Tutorial For Anyone Interested.
Statistics
Likes
16
Downloads
0