5” Slim HDMI monitor case for Raspberry and other
Description
Update 2020 01 31 : Add 1Mm More On Top For Nutter5 The From Panel Is Now With 1Mm More. Same For The Support The 2 Files Are: - Support_Variableanglewith1Mmmore.Stl - Screen_Frontcoverwith1Mmmore.Stl ------------------------------------- Update 2017 12 09 : Add New Support A New Base Available In The Package Or Alone: Https://Www.Thingiverse.Com/Thing:2701453 ------------------- After Buying A 5 Inch Touch Screen Monitor (23€) For My Raspberry On Aliexpress, I Tried To Find A Case For It. But Impossible To Find A Slim Case For It, And I Wanted To Use It Like A Monitor, Not Linked With The Raspberry Because You Can’T Add The Fan And I Have 2 Rpi 3. By Using My Case Alone, It’S A Hdmi Screen Without Touchscreen, But I Don’T Care Because The Accuracy Of The Touch Is Not Very Good, I Prefer To Use A Bluetooth Mouse. This Slim Case Is Very Easy To Print And Combine Each Parts. Use 4 Screws 2Mm To Combine The 2 Parts Of The Case. Use 4 Screws 3Mm To Fix The Flexible System. Use 1 Screw 3Mm To Combine The Base And The Screen. Inside The Base, You Can Put 3 Micro Sd Card On It Stl Files For A Support Like A Monitor, Or Like A Stand (More Stable). Back Panel Is Now 1Mm More Than On My Printed Model. It Seems To Be A Screen From Waveshare (Original Or Not??), I Have Same Touch Driver And Settings. All Parts Could Be Printed Without Skirt / Support / Brim. Printed In Pla On Flashforge Creator Pro
Statistics
Likes
90
Downloads
0