Sink & Bathroom Plunger
Description
<P> A Functional Pneumatic Plunger To Unclog A Sink. </P> <P> How To Use: </P> <Ul> <Li> Screw-In The Rod Into The Cylinder. </Li> <Li> Install The Pneumatic Cylinder. We Want A Very Tight Fit, It Will Settle After A Few Movements. Use Some Candle Wax Around The Cylinder To Push It Inside. Start With The Standard Cylinder: Cylinder 0.0 (Standard Size). Print Only This Cylinder First. </Li> <Li> If It'S Too Tight, Print Cylinder -0.2; It’S A Cylinder With 0.2 Mm Smaller Diameter. </Li> <Li> If That Doesn'T Work, Go To Cylinder -0.3. </Li> <Li> If The Standard Cylinder Doesn’T Fit Tightly For Some Reason, Try Cylinder +0.2 Or Cylinder +0.3. </Li> <Li> Use An Optional Skirt For A Better Suction In Some Sinks. </Li> </Ul> </P> Printed At 0.1 Mm Layer, 20% Fill. Supports: None. 0.2 Mm Layer Should Be Ok. </P> <P>Our Other <A Href="Https://Www.Thingiverse.Com/Iomaa/Designs ">Thingiverse Projects</A>.</P> <P>Enjoy</P>
Statistics
Likes
139
Downloads
0