X axis hook (GeeTech i3 proC)

Description

A Hook To Hold Up The X Axis Assembly Of A Geetech I3 Pro C Printer. Use A Pair. An Extra Benefit Of An Anti Z-Wobble Part Is That It Allows You To Pull Up The Whole X Axis Assembly. I Use This To Clean The Nozzle, Change Filaments, Or Just Clean The Build Plate. Center The X Axis. Use Both Hands. Grab The Left And Right Of The Top X Axis Rod With The Round Hooks From Behind, Pull Up And Hook The Square Parts Over The Acrylic Frame, To The Left And Right Of The Display. This Might Work For Other Printers With A Similar Layout, But Probably Not As Well When The Distances And Sizes Aren’T Exactly The Same. There Are Now Two Styles, One That Goes To The Front Of The Frame, And One That Hooks Over The Back Of The Frame. That One Is A Bit More Cumbersome, But It Works When You Have An X Axis Cable Chain Installed. #### Caveat This Requires An Anti Z-Wobble Part. Without It, When Pulling On The Rods You’Ll Lift The Whole Printer. #### Caveat 2 Remember To Let The Assembly Down Again Before You Start A Print. I Mention This Because This Might Be Something That People Might Forget. It Totally Hasn’T Happened To Me, Like, A Dozen Times. Of Course Not.

Statistics

Category

Tags