More Realistic Ball-Joint Articulated Octopus

Description

Hello Guys! I Just Printed This Awesome Model, My Settings I Used Was: Layer Height 1.0 Speed 50 Mm/S Supports Yes 1Mm So I Could Have A Lot Of Details (Also Used 2 Dense Support Layers), No Brim, Just Skirt. Infill: Multiprocesses Most Of It Is 5% But There Are Some Parts With 35% Even 50% At The Top, Note: If You Are Going To Print From The Factory File I Upload, You Dont Need To Resize Nothing In Any Way In Case You Are Not Using The Factory File Follow This Recommendation: I Had To Resize It To 130%, But Beware, If You Use The Realistic Tentacles And You Scale It At The Same % They Will Be So Loose, That They Wil Fall.. For The Legs I Used 140% But Im Going To Post The Settings In Case You Want To Do The Same Size. Tentacles: Https://Www.Thingiverse.Com/Thing:1998738/#Files For The Base Of The Head Where The Tentacles Attach I Used 3 Wall Layers Instead Of Normally 2 Just To Reforce The Area. If You Want To Resize You Have To Change Some Process Settings In Order For This To Work I Had To Post As Remix In Order To Post The Factory Code From Simplify No Need To Add Tolerances In Any Value.

Statistics

Category

Tags