Custom UART 2102 Interface Case with 'cheat" window
Description
Updated Version Of Design By Gnabeyama: Http://Www.Thingiverse.Com/Thing:136359 This Version Uses That One'S Lid, So You'Ll Need To Download: "Usb_Case_Top_Repaired.Stl", (I'Ve Added A Copy On The Thing Files Page As Of 3/1/2015) Customized This To Fit One Of The Newer 6-Pin Usb Uart 2102 Adapters Floating Around Ebay For A Mere .45 Cents. ___________________________________________________ Changes Include: * Raised Walls To Accommodate Higher Pin-Headers. * Moveable Board-Retainer That Prevents The Chip From Receding Into The Case When Usb Port Is Plugged In. * & A Cheater'S Window On The Bottom So You Can See Which Pins Are Labelled Which Without The Need To Remove The Case. ------------------------------------------------------------------------------- 5/7/14 - Update:. Uploaded An Stl Version Per Franic'S Request. Uploaded V2 "Customuart_With_Window-A-V2",Thing And .Stl V2 Revision Notes: *Longer Window (So You Don'T Mix Up Voltage) *Improved Visibility (Window View-Angle) 1/31/15 - Update:. Uploaded "Custom_Uart_Openwindow-V3.Stl" An Open-Window Reference Version Intended For Those Who Can'T Make The Window Adjustments Or Get This To Print With A Window, Also Tweaked The Design Slightly.. V3 Revision Notes: *Fully Open Window (Non-Adjustable .Stl) *More Efficient Print (Quicker To Finish, Less Filament) V3.1 - Minor Fixes To Bridge Over The Usb Port. ___________________________________________________ This Was My First Design Here. With Literally Less Than 24-Hours Of 3D Printing Under The Belt.. (Nonstop, Of Course!)
Statistics
Likes
23
Downloads
0