IKEA "Lack" enclosure for original Prusa i3 MK2 MMU (+ Upgrades)

Description

Draft ==================== This Will Become A Collection Of Things I Designed And Printed To Build An Enclosure For My Prusa I3. It'S Not Finished Yet. So I Will Update This Thing Regularly. That'S Why I Call It A Draft. Goal ==================== Goal Of This Project Is To Create A Printing Enclosure For My Original Prusa I3 Based On The Ikea "Lack" Table. The Reason Was, That The Printer Is Really Loud And My Neighbours Freaked Out Several Times. So The Enclosure Primarily Should Silence The Printer Sounds. Other Requirements Are: -------------------------------- * Should Look Nice * Led Enlightened (Multicolor) * Everything Should Be Controllable Remotely * Print Should Be Monitorable By Cam(S) * Extendable (Also With Printer Extensions / Add-Ons) Sources ==================== I Used Some Existing Models And Modified Others: * Modified Https://Www.Thingiverse.Com/Thing:931209 (Bolder And Cutouts For Table Mounts, Filament_Holder_2Cm-Filamentrack.Stl) * Modified Cable Holes From Https://Www.Thingiverse.Com/Thing:1685857 (Higher, Cable_Holes.Stl) * Used Https://Www.Thingiverse.Com/Thing:922740 (Raspberry Pi2 Mount) * Used Https://Www.Thingiverse.Com/Thing:36465 (Ba3A8F8B7C9Ff968E175961E19C17242.Stl) Own Models ==================== This Models I Designed In My Own For This Project: * Table Mounts For Boomstick Filament Holder (Filament_Holder_2Cm_Mount-Cube_002.Stl + Filament_Holder_2Cm_Mount-Cube_003.Stl) * End Caps For Broomstick Filament Spool Rack (Caps_Holder_Tube_Ends-Caps-Sphere.Stl) * Acrylic Glass Plates Magnet Mounts (Acrylic_Glass_Magnet_Mount.Stl And Magnet_Mount.Stl) To Make Two Of The Acrylic Plates Detachable

Statistics

Category

Tags