Lithopane Light box
Description
This Box Was Custom Designed For 100Mm X 100Mm X 3Mm Lithopanes. I Have Included 3 Lithophane "Stock Photos" That I Used In One Of Mine, The Other Are Personal Pictures. The "Stock Photos" Were All Originally Found By Google Image Search All Licensed As For Reuse, I Claim No Copyright On Any Images On The Lithophanes. I Get My Use 3Dp.Rocks To Make The Lithhopanes. I Recommend Printing Lithophanes Standing Upright, I Rotate The Images 90° On The X And Y Axis There Are 3 Sides That Can Be Swapped Out So You Can Change The Images Whenever You Like With New Ones. The <A Href="Https://Www.Walmart.Com/Ip/Holiday-Time-4Ft-Light-Cord-With-Bulb/163234214?Wmlspartner=Wlpa&Selectedsellerid=0&Adid=22222222227108878306&Wmlspartner=Wmtlabs&Wl0=&Wl1=G&Wl2=C&Wl3=224856334251&Wl4=Pla-367970269080&Wl5=9006251&Wl6=&Wl7=&Wl8=&Wl9=Pla&Wl10=8175035&Wl11=Online&Wl12=163234214&Wl13=&Veh=Sem">Light</A> I Use Is A Simple Decorative Bulb From Wal-Mart. It Is A Very Low Wattage And Does Not Put Off Enough Heat To Worry About Melting The Box. The Images I Have Of Finished Ones, Are From The Prototyping Phase Of The Originals, I Have Since Decided To Light It From The Back Instead Of The Bottom, And Remove The Bottom Plate. I Also Rounded The Edges Of The Frame To Make Them Smoother. I Do Not Recommend Scaling, Unless You Take Into Account The Scaloing Of The Lithophanes Also.
Statistics
Likes
38
Downloads
0