CR10 2.3kg Spool Holder for controlbox
Description
A Simple And Reliable Spool-Holder For Larger Rolls Of Filament. Fits Spools That Are Up To 120 Or 130Mm Wide And Has At Least A Ø50Mm Hole. Max Spool Outer Ø Is 310Mm [Update] 2018-02-26 - The 130Mm Version Was Kindly Provided By Hutchyx. It Works With Mamorubot Spools. You Can Find Him Here: Https://Www.Thingiverse.Com/Hutchyx/Designs You Will Need: 2X 608 Bearings (Ø22, Width8, Innerø7Mm) 2X M8 Bolts (Printable Version Included) 4X M5 Screws 1X M5 Tap For The Holes In The Bottom Bracket. I Drilled And Tapped A Hole For A Screw On Mine To Create Some Friction For The Axle (See Last Picture). Otherwise The Spool Could Unwind Too Much Filament On Fast Printer Moves. Before Uploading This, I Added Four Small Cut-Outs With The Intention To Put A Zip Tie On One Of The Holders To Increase Friction, But I Just Realized That There Is Not Enough Space For Them Lol. Feel Free To Remix This In Any Way You Want :) Https://Youtu.Be/Sw5S5Zl6Jey
Statistics
Likes
61
Downloads
0