Titan Aero for Wanhao I3 Plus with Belt Tensioner
Description
Remixed To Fit On The Wanhao I3 Plus Version. I Tried To Replicate The Original Hot End Dimensions Between The Nozzle, The Rails And End Stops, In Order To Retain The Original Print Volume. However We Do Lose About 5Mm~10 Of Z Distance, Due To The Z Height Of The Reduction Gear. Print With Petg If You Print Abs Or High Temp Filament. *Update 17/4/18: Added V2 With New Belt Tensioner And Adapter For Ciii Cooler, Type B Arm Removed. V2 Is Recommended For Better Belt Tensioning System Hardware Required: --------------------------- * Titan Aero * 23Mm Pancake Stepper * 5015 Blower Fan * 2 Pcs M2 X 10Mm Bolt (Stock) * 2 Pcs M3 Nyloc Nut * 2 Pcs M3 X 12 Mm Bolt * 1 Pc M3 X 35 Mm Bolt * 2 Pcs M4 X 6 Mm Bolt (Stock) * 4 Pcs M4 X 8 Mm Bolt (Stock) * 2 Pcs M4 X 15 Mm Bolt * 1 Pc M4 X 25 Mm Bolt * 1 Pc M4 Nyloc Nut * 2 Pcs M4 Low Profile Nut (Thickness ~ 3Mm) Printed Parts: ------------------- * Carriage Plate * Belt Holder Arm + Base * Thorped Arm Or Ciii Adapter Block * Thorped Cooler Https://Www.Thingiverse.Com/Thing:1246425 Or * Ciii Cooler Https://Www.Thingiverse.Com/Thing:2004629 * Bearing Blocks Https://Www.Thingiverse.Com/Thing:1172838 (One Normal And One With Belt Cutout, Or The Cutout Block Only For With Ciii Adapter Block) * Wanhao Plus Pcb Carrier Https://Www.Thingiverse.Com/Thing:2050121 Instructions: ----------------- (Follow Photos For Reference) 1. Remove X Rods And Replace The Bearing With New Printed Bearing Blocks (No Need To Remove The Whole Carriage), Use Ciii Adapter Block For Ciii Cooler 4. Re Install The X Rods 2. Attach Carriage Plate To Bearing Blocks With Stock M4 X 8Mm Bolts 3. Assemble Belt Tensioner With M3 X 35Mm Bolt And Nut 4. Attach It To Carriage Plate With M4 X 25Mm Bolts And Low Profile Nuts 5. Attach Pcb Carrier To The Top Bearing Block With Stock M4 X 6Mm Bolts, And Install The Pcb 6. Re Attach X Endstop With Stock M2 Bolts, And Install The Aero As Per E3D Instructions 7A. Attach The Thorped Cooler To The Thorped Arm With M3 X 15Mm Bolts And Nyloc Nuts 7B. Attach The Ciii Cooler With M4 X 15Mm Bolts, Or The Thorped Arm + Thorped Cooler 8. Attach The 5015 Blower To The Arm/Ciii Cooler With M4 X 25Mm Bolt And Nyloc Nut
Statistics
Likes
25
Downloads
0