Sound Hole Preamp Mount for Fishman 301 presys in Camps M1S guitar
Description
I Have A Camps M1S Classical Guitar. Since I Wanted To Mount A Preamp To My Guitar, I Was Not So Willing To Drill A Big Square Hole On The Guitar Body. No! I Would Not Sacrifise My Guitar For This Purpose. So The Idea Came For This Purpose. I Would Still Mount My Fishman Presys 301 Preamp To The Guitar. And It Must Have Been On Its Sound Hole! This Is Still An Continuing Project. 1- One Side Of The Mount Should Be Taken Off Due To The Fret Location. I Didnt Do It On Stl File. So I Will Do It Later. 2- The Guitar'S Acoustic Sound Was Decreased Due To Closing The Sound Hole. So I Need To Open Holes On The Plastic In My Next Workshop. Hexagonal Honeycomb Geometry Would Seem Sophisticated. 3-This Mount Fits Very Well On The Guitar Due To Exact Measurement. But It Comes From Sometimes While I Am Playing And Touching The Strings. I Need To Find A Solution For That. A Locker Unit, A Bolt Or A Mechanism That Locks The Preamp Mount Around The Sound Hole Properly. Note: So I Drilled 2 Holes In The Guitar: 6.5Mm Output Jack At The Bottom Of The Guitar And Tiny Piezo Hole Under The Saddle Of Guitar. Enjoy Music!
Statistics
Likes
6
Downloads
0